Here is a closer view of a leading edge rib which has been rivetted inside the skin.
posted by Chip at 9:45 PM
Monday, May 08, 2006
Here is a closer view of a leading edge rib which has been rivetted inside the skin.
Previous Posts
- These are the three leading edge assemblies. You m...
- The cable then attaches to this aileron bell crank...
- To operate the ailerons, a cable will pass behind ...
- The ailerons are suspended from these two hinges.
- This is the bellcrank that will operate the flaps.
- Here are the two flap tracks...looking inboard.
- Most of the components that need to be attached to...
- Here is the inboard flap track...another one is fu...
- Here the assembly is mounted on the aft spar of th...
- The flaps move on a track. The track is joined to...
<< Home