And the stringers (the horizontal channels)
posted by Chip at 10:03 PM
Monday, May 08, 2006
Previous Posts
- Now the assembly is attached to the wing structure...
- I have taken the leading edge assemblies and cleco...
- All of the ribs are now rivetted into place. They...
- This is a view from the outside. Once the holes w...
- Here is a closer view of a leading edge rib which ...
- These are the three leading edge assemblies. You m...
- The cable then attaches to this aileron bell crank...
- To operate the ailerons, a cable will pass behind ...
- The ailerons are suspended from these two hinges.
- This is the bellcrank that will operate the flaps.
<< Home