Chip's Sportsman

This blog will chronicle the contruction of my GlaStar Sportsman airplane (hopefully). The most recent happenings are presented first and goes backward to the beginning. Use the monthly navigation bar on the right if you want to start from the beginning. Select January and then go to the bottom. I hope you enjoy it. Chip. Send comments to hswett@yahoo.com.

Sunday, April 02, 2006

Here is the inboard flap track...another one is further out on the wing.

posted by Chip at 9:50 PM

Previous Posts

Here the assembly is mounted on the aft spar of th...
The flaps move on a track. The track is joined to...
Here is another bracket that I made supporting the...
The rough cut piece on the grinder, ready to be cl...
Here I am making bracket from a piece of aluminum ...
Some pieces have to be fabricated from stock alumi...
These are hinge brackets which are also 3 part ass...
Now it starts getting fun again. It's time to fabr...
You havn't seen a lot of pictures lately...partly ...
To install these, you have to take the skins off. ...