Here are the two flap tracks...looking inboard.
posted by Chip at 5:55 PM
Tuesday, April 25, 2006
Previous Posts
- Most of the components that need to be attached to...
- Here is the inboard flap track...another one is fu...
- Here the assembly is mounted on the aft spar of th...
- The flaps move on a track. The track is joined to...
- Here is another bracket that I made supporting the...
- The rough cut piece on the grinder, ready to be cl...
- Here I am making bracket from a piece of aluminum ...
- Some pieces have to be fabricated from stock alumi...
- These are hinge brackets which are also 3 part ass...
- Now it starts getting fun again. It's time to fabr...
<< Home