These pieces of scrap metal help hold in place temporarily...
posted by Chip at 7:26 PM
Sunday, December 11, 2005
Previous Posts
- Ok...I think it's finally as true and straight as ...
- Another view of the Swett method for eliminating t...
- Before putting the aluminum skins on the wings, th...
- It took the better part of the weekend just to dri...
- Well that looked good, but you have to take it all...
- And the inboard skin.
- Here's the center skin.
- Eventually it all lined up properly and I drilled ...
- Fitting the skins is a little tricky. You have to ...
- These are the leading edge ribs. It's important t...
<< Home