Before mounting the hinges, the holes in the elevator spar which were cut to lighten the elev. need to be sealed with aluminum tape.
posted by Chip at 9:20 PM
Sunday, April 10, 2005
Before mounting the hinges, the holes in the elevator spar which were cut to lighten the elev. need to be sealed with aluminum tape.
Previous Posts
- It's time to attach the hinges to the elevator, th...
- Here it is riveted in place. Seems quite strong a...
- I decided to see if I couldn't come up with soluti...
- This is the back of the trim tab. Inside there are...
- Here is a closeup of the control horn. Pretty cool...
- Here is the trim tab partially assembled. The cont...
- The gap which you saw in the last picture is where...
- Here it is standing up.
- This is the other side of the elevator. You have t...
- Which you can also see here. Driving these rivets ...
<< Home